OlympusEdge Setup
Hardware requirements, physical installation, and initial configuration for your OlympusEdge server.
Hardware Specifications
Server Specifications
| Component | Minimum | Recommended |
|---|---|---|
| CPU | Intel i5 / AMD Ryzen 5 | Intel i7 / AMD Ryzen 7 |
| RAM | 16 GB | 32 GB |
| Storage | 256 GB SSD | 500 GB NVMe |
| Network | Gigabit Ethernet | Dual Gigabit |
| UPS | 15 min runtime | 30+ min runtime |
Network Requirements
| Connection | Purpose | Speed |
|---|---|---|
| Primary Internet | Cloud sync, updates | 50+ Mbps |
| LAN | POS terminals, KDS | Gigabit |
| 4G/5G Backup | Failover connectivity | 25+ Mbps |
Physical Installation
-
Location
- Secure, climate-controlled area
- Near network switch
- Accessible for maintenance
-
Power
- Connect to UPS
- Use surge protection
- Dedicated circuit recommended
-
Network
- Connect to primary switch
- Configure static IP
- Connect 4G/5G modem
Initial Configuration
Accessing Admin Console
- Connect to same network as server
- Open browser to
https://edge.localor server IP - Log in with owner credentials
First-Time Setup Wizard
┌─────────────────────────────────────────────────────────────────┐
│ OLYMPUSEDGE SETUP WIZARD Step 2 of 6 │
├─────────────────────────────────────────────────────────────────┤
│ │
│ CLOUD CONNECTION │
│ ─────────────────────────────────────────────────────────── │
│ │
│ Connect to your Olympus Cloud account to enable │
│ synchronization and remote management. │
│ │
│ Cloud Region: [US West ▼] │
│ Tenant ID: [abc123-xyz789 ] │
│ Location ID: [loc_001 ] │
│ │
│ API Key: [•••••••••••••••• ] │
│ │
│ [Test Connection] │
│ │
│ Status: ✓ Connected to Olympus Cloud │
│ │
│ [Back] [Next →] │
│ │
└─────────────────────────────────────────────────────────────────┘
Configuration Steps
- Network Setup - IP, DNS, gateway
- Cloud Connection - API keys, tenant ID
- Backup Connectivity - 4G/5G SIM activation
- Initial Sync - Download menu, prices, staff
- AI Models - Load edge AI models
- Verification - Test all systems
4G/5G Backup Setup
SIM Configuration
- Insert SIM card in modem
- Go to Admin > Network > Backup
- Configure APN settings
- Test connectivity
Failover Settings
┌─────────────────────────────────────────────────────────────────┐
│ BACKUP CONNECTIVITY │
├─────────────────────────────────────────────────────────────────┤
│ │
│ CELLULAR MODEM │
│ ─────────────────────────────────────────────────────────── │
│ Status: ● Standby (Ready) │
│ Carrier: Verizon LTE │
│ Signal: ████░ -72 dBm (Good) │
│ Data Used: 1.2 GB / 10 GB │
│ │
│ FAILOVER SETTINGS │
│ ─────────────────────────────────────────────────────────── │
│ Trigger After: [30] seconds without primary │
│ Fallback Mode: [● Essential Only] [ ] Full Traffic │
│ Auto-Return: [✓] Return to primary when available │
│ Monthly Data Cap: [10] GB (alert at 80%) │
│ │
│ ESSENTIAL TRAFFIC (when limited) │
│ ─────────────────────────────────────────────────────────── │
│ [✓] Payment processing │
│ [✓] Order sync │
│ [✓] Critical alerts │
│ [ ] Analytics upload │
│ [ ] AI model updates │
│ │
│ [Test Failover] [Save Settings] │
│ │
└─────────────────────────────────────────────────────────────────┘
Related Guides
- Offline Mode - Offline operation and data sync
- Maintenance - Updates, monitoring, and troubleshooting
- Network Setup - Network configuration